nivacentre car servicing and repair - Niva SUV required factory maintenance task list

Maintenance interval:

Maintenance 1 ( 2000км) 2000 - 3000 км

Maintenance 2 (10000км) 9500 - 10500 км

Maintenance 3 (20000км) 19500 - 20500 км

Maintenance 4 (30000км) 29500 - 30500 км

Maintenance 5 (40000км) 39500 - 40500 км

Maintenance 6 (50000км) 49500 - 50500 км

Maintenance 7 (60000км) 59500 - 60500 км

Maintenance 8 (70000км) 69500 - 70500 км

Maintenance 9 (80000км) 79500 - 80500 км

For Chevrolet-Niva here

Service schedule for SUV Niva 21214, 2131 as in AVTOVAZ service book, 2013.

No.	Type of service	Maintenance No.
No.	Type of service	1	2	3	4	5	6	7	8	9
	1. Check and inspection tasks (diagnostics) ¹ Check:
1.1	Body condition: -Existence of body fractures and corrosion, wheel arch and body underside anti-corrosive coating peeling; -functionality of door locks	+	+	+	+	+	+	+	+	+
1.2	Condition of suspension front wishbone arms and rear rods and their rubber-metal bushings; ball joints; rod end ball joints, front axle CV joints and their dust covers; rubber boots and caps, bump stops; rubber bushes; shock absorbers	+	+	+	+	+	+	+	+	+
1.3	Steering wheel slop	+	+	+	+	+	+	+	+	+
1.4	fluid-tightness of cooling system, fuel system, hydraulic breaks and clutch actuation systems, power steering; condition of hoses, lines and fittings	+	+	+	+	+	+	+	+	+
1.5	Leak tightness of units and module assembly seals уплотнений узлов и агрегатов	+	+	+	+	+	+	+	+	+
1.6	Fluid levels in brake and clutch hydraulic systems reservoirs and functioning of brake fluid low level sensor	+	+	+	+	+	+	+	+	+
1.7	Coolant level in overflow tank	+	+	+	+	+	+	-	+	+
1.8	Condition and tension of alternator belt	+	+	+	+	+	+	+	+	+

page 12

Continued

No.	Type of service	Maintenance No.
No.	Type of service	1	2	3	4	5	6	7	8	9
1.9	Battery electrolyte level and electrolyte specific gravity	-	+	+	+	+	+	+	+	+
1.10	Condition of wires, reliability of its connections and mounting clamps	+	-	-	-	-	-	-	-	-
1.11	Functioning of alternator, lighting devices, light signaling and dashboard gages	+	+	+	+	+	+	+	+	+
1.12	Functioning of toxicity reduction system	+	+	+	+	+	+	+	+	+
1.13	Absence of excessive noise and knocks in powertrain	+	+	+	+	+	+	+	+	+
1.14	Clutch pedal free play	+	-	+	-	+	-	+	-	+
1.15	Brake system effectiveness	-	+	+	+	+	+	+	+	+
1.16	Oil level in gearbox, transfer case, front and rear axle gears	-	+	+	+	-	+	+	+	-
1.17	Oil level in steering mechanism sump	-	-	-	-	-	-	+	-	-
1.18	Condition of anti-roll stabilizer bar rubber bushings	-	-	-	+	-	-	+	-	-
1.19	Condition of hydraulic shock absorbers	-	-	-	+	-	-	+	-	-
1.20	Adjustment of parking break and position of brake pedal sensor switch	+	-	+	-	+	-	+	-	+
1.21	Performance capability of brake pressure regulator (or ABS) and vacuum booster	-	-	-	+	-	-	+	-	-
1.22	Performance capability of thermostat	-	-	+	-	+	-	+	-	+
1.23	Liquid level in reservoir of power steering system	+	+	+	+	+	+	+	+	+

page 13

Continued

No.	Type of service	Maintenance No.
No.	Type of service	1	2	3	4	5	6	7	8	9
	2. Maintenance work
2.1	Tighten mount points of assembly modules, chassis units and elements	+	-	+	-	+	-	+	-	+
2.2	Change fuel filter	-	-	-	+	-	-	+	-	-
2.3	Clean out and wash engine sump ventilation system elements	-	-	-	-	-	-	+	-	-
2.4	Change [engine] air filter element	-	-	-	+	-	-	+	-	-
2.5	Change oil in engine sump and oil filter ²	+	+	+	+	+	+	+	+	+
2.6	Change oil in gearbox, transfer case, front and rear axle gears	+	-	-	-	+	-	-	-	+
2.7	Change engine coolant ³	-	-	-	-	-	-	+	-	-
2.8	Measure front wheel hub bearings axial backlashes and adjust them if needed	+	+	+	+	-	+	+	+	+
2.9	Change lubricant and adjust front wheel hub bearings	-	-	-	-	+	-	-	-	-
2.10	Change lubricant in drive shaft spline connections and cross bearings	-	+	+	+	+	+	+	+	+
2.11	Check condition of front break pads	-	+	+	+	+	+	+	+	+

page 14

Continued

No.	Type of service	Maintenance No.
No.	Type of service	1	2	3	4	5	6	7	8	9
2.12	Check condition of rear break shoes	-	-	+	-	+	-	+	-	+
2.13	Check condition of wheel rims and tires, balance wheels and rotate them according to rotation map	-	+	+	+	+	+	+	+	+
2.14	Perform front wheel alignment	+	-	+	-	+	-	+	-	+
2.15	Change brake fluid in brake system and hydraulic clutch actuation system³	-	-	-	+	-	-	+	-	+
2.16	Change spark plugs	-	-	-	+	-	-	+	-	-
2.17	Sand starter motor rotor commutator, check brushes wear and how they fit in place. Clean up and lubricate starter actuator mechanism [solenoid and its fork assy] parts.	-	-	-	-	+	-	-	-	+
2.18	Sand alternator contact slips, check brushes wear and fitting in place.	-	-	-	+	-	-	+	-	-
2.19	Lubricate: -door hinges, rear seat joints, bonnet lock cable; -door stays; -swivel and spring of fuel tank cap cover; -door lock keyholes; -axle, spring and cotter pin of door lock striker plate	-	+	+	+	+	+	+	+	+

page 15

Continued

No.	Type of service	Maintenance No.
No.	Type of service	1	2	3	4	5	6	7	8	9
2.20	Clean and grease battery clamps and terminals	-	-	+	-	+	-	+	-	+
2.21	Clean sill drain holes, door drain holes and front wing cavities	+	+	+	+	+	+	+	+	+
2.22	Adjust headlamp beam direction	+	-	+	-	+	-	+	-	+
2.23	Check absence of error codes in ECU memory and functionality of indicator light "Check engine" - light should be lit on ignition turned on and go out after engine started. If there are error codes, eliminate error causes and remove codes from ECU memory	+	+	+	+	+	+	+	+	+

«+» - task carried out; «-» - task not carried out.

¹Fault elimination, as well as that due out of owner's failure to fulfill user requirements during warranty period and rustproofing works are carried
out for extra charge.

² Or after 2 years, what comes first.

³ Or after 3 years, what comes first.

page 16

Niva 21214, 2131 factory required maintenance task checklist